In the field of building material, rebar and steel wire are mostly used items.
Today, let us take a look at the process how to get the rebar or steel wire to the
expected wire and length according to our special requirements.
To begin with, we will need to purchase Rebar or steel wire rod from the iron steel plant. Pls make sure that the quality is good to be processed at the following stages. Then we can start the project.
1- For rebar, we will need to use Rebar Cold Drawing Machine to get the rebar
to the expected diameter.
2- For steel wire, we will need to use two kinds of machines to get to the
expected diameter and length.
1) Wire Drawing Machine. Normally, we choose simple ways to draw the wire
rod. So we recommend the Horizontal type wire drawing machine to get the expected diameter of the steel wire.
2) Wire straightening and cutting machine. With this one, we can straighten the wire and cut to expected length.
Above all is How to get the Rebar or Steel wire to the expected diameter and
length. For more information, pls visit our website: http://www.wzxjjx.com
Comments