Have you ever thought of manufacturing bolts, nuts & screws by yourselves? In
Almost every industry, we use nuts & screws. It is equal the meaning of water to
humans as standard components to Industries.
Today, let us take a look at the process how these nuts, screws, standard
components are made.
1- Firstly, We will need to purchase steel wire rod from the iron steel plant.
Pls make sure that the quality is good to be processed at the following stages.
2- Secondly, we will need use Wire Descaling Machine to clean the surface of the wire if it is oxidized. Traditionally, people take the method of acid pickling to clean the wire, which does harm to the environment and the worker’s health. So we recommend the acid pickling- free type, which is equipped with the vacuum machine and is totally environmentally friendly.
3- Thirdly, we will need to use the Wire Drawing Machine to get the wire to the
expected diameter, according to different requirement for the nuts, screws we
want to produce. Normally, we choose simple ways to draw the wire rod. So we
recommend the Horizontal type wire drawing machine & Vertical type wire
drawing machine. The horizontal type is only for drawing wire, while the vertical
type can do wire drawing and wire coiling at the same time.
4- Fourthly, We will need to use Cold Heading Machine to cut and form the
shape. There are several models to choose from according to our requirements.
5- Fifthly, We will need to use Thread Rolling Machine to get the thread on the
Components. Again, there are several models to choose from according to our
requirements.
Above all is How to manufacture screws like standard components. For more
Information, pls visit our website: www.wzxjjx.com
Comments