CLEAN (2)

In the field of building material, rebar and steel wire are mostly used items.
Today, let us take a look at the process how to get the rebar or steel wire to the
expected wire and length according to our special requirements.

 

To begin with, we will need to purchase Rebar or steel wire rod from the iron steel plant. Pls make sure that the quality is good to be processed at the following stages. Then we can start the project.

 

1- For rebar, we will need to use Rebar Cold Drawing Machine to get the rebar
to the expected diameter.

2- For steel wire, we will need to use two kinds of machines to get to the
expected diameter and length.
1) Wire Drawing Machine. Normally, we choose simple ways to draw the wire
rod. So we recommend the Horizontal type wire drawing machine to get the expected diameter of the steel wire.
2) Wire straightening and cutting machine. With this one, we can straighten the wire and cut to expected length.

Above all is How to get the Rebar or Steel wire to the expected diameter and
length. For more information, pls visit our website: http://www.wzxjjx.com

 

 

Best regards

Terry Lin

Sales Director

Skype: terry0501258

Web: http://www.wzxjjx.com

Email: terrylin@wzxjjx.com

Wenzhou Quxi New Street Machinery Factory

Read more…

Have you ever thought of manufacturing bolts, nuts & screws by yourselves? In

Almost every industry, we use nuts & screws. It is equal the meaning of water to

humans as standard components to Industries.

 

Today, let us take a look at the process how these nuts, screws, standard

components are made.

1- Firstly, We will need to purchase steel wire rod from the iron steel plant.

Pls make sure that the quality is good to be processed at the following stages.

 

2- Secondly, we will need use Wire Descaling Machine to clean the surface of the wire if it is oxidized. Traditionally, people take the method of acid pickling to clean the wire, which does harm to the environment and the worker’s health. So we recommend the acid pickling- free type, which is equipped with the vacuum machine and is totally environmentally friendly.

3- Thirdly, we will need to use the Wire Drawing Machine to get the wire to the

expected diameter, according to different requirement for the nuts, screws we

want to produce. Normally, we choose simple ways to draw the wire rod. So we

recommend the Horizontal type wire drawing machine Vertical type wire

drawing machine. The horizontal type is only for drawing wire, while the vertical

type can do wire drawing and wire coiling at the same time.

 

4- Fourthly, We will need to use Cold Heading Machine to cut and form the

shape. There are several models to choose from according to our requirements.

 

5- Fifthly, We will need to use Thread Rolling Machine to get the thread on the

Components. Again, there are several models to choose from according to our

requirements.

 

Above all is How to manufacture screws like standard components. For more

Information, pls visit our website: www.wzxjjx.com

 

Best regards

Terry Lin

Sales Director

Skype: terry0501258

Web: http://www.wzxjjx.com

Email: terrylin@wzxjjx.com

Wenzhou Quxi New Street Machinery Factory

Read more…

Blog Topics by Tags

  • in (506)
  • to (479)
  • of (339)
  • ! (213)
  • as (166)
  • is (157)
  • a (156)

Monthly Archives